Automation for gates CAME Krono, Ati, Axo, Flex, etc.

Automation for sliding gates is necessary to fully automate the process of opening and closing gates. The installation of the drive makes it possible to open the gate without human intervention. As an additional device, a motion sensor can be installed, which will automatically respond by opening the gate if necessary. Installation of ready-made automation kits is very simple and does not take much time.

Models:
BX P, 10, 68, 74, 78, 243, 246;
BK 221, 1200, 1200P, 1800, 2200, 2200T;
BY 3500T.

• BX. Technical specifications.
• BK. Technical specifications.
• BY. Technical specifications.

Automation for swing gates is made of dense and hard metals. The opening and closing of the gate flaps can be carried out from the control center or performed independently, subject to the presence of a motion sensor. Such a drive can open the gate both outwards and inwards. A set of automation for swing gates includes a set of modern equipment. Thus, the operation of the automatic gate system is controlled remotely via the remote control. To open the gate, you just need to press the button.

Models:
Krono KR310D, KR310S, KR312D, KR312S;
Ati A3000A, A5000A, A3024N, A5024N;
Axo AX302304, AX402306, AX3024, AX5024, AX71230;
Flex F500, F510;
STYLO ME, RME;
Fast F7024N;
Fast40 FA40230CB, FA40230, FA4024CB, FA4024;
Fast70 FA70230 CB, FA70230;
Ferni F1000, F1024;
Frog A, AV, A24, PM4, PM6.

• Krono. Technical specifications.
• Ati. Technical specifications.
• Axo. Technical specifications.
• Flex. Technical specifications.
• Stylo. Technical specifications.
• Fast. Technical specifications.
• Ferni. Technical specifications.
• Frog. Technical specifications.

Automation for garage doors makes it easier to open and close garage spaces. The control is carried out using the remote control. The system itself consists of a drive that is installed on the gate. It is very convenient to use, easy to operate and is used in most garages. Automation is attached to the surface of the gate and allows you to automatically control the doors.

Models:
Ver 10, 12;
Emega E456, E1024;
Emega40 EM4024, EM4024CB.

• Ver. Technical specifications.
• Emega. Technical specifications.

Automation for industrial gates is designed to automate sectional doors equipped with a sliding transmission lever, as well as all types of industrial gates, sliding and folding gates. For large industrial gates, axial drives are used that directly rotate the shaft on which the torsion springs are located.

Models:
C BX, BXT, BXE, BXET, BXE24, BXK, BXEK.

• CBX. Technical specifications.

Price list

Catalog